| Handset Registration |
36
No.
Item
Description
5
Long tap to switch the input modes.
6
Tap to switch to the lowercase input mode.
7
Tap to switch to the numeric&symbolic input mode.
Handset Registration
You need to register your handset to a base station, if you want to use the basic functions of the DECT
phone. You can register a handset to 4 different base stations at most. You can select the desired base to
use.
Note:
Up to 10 handsets can be registered to one base station.
•
Putting the Base Station into Registration Mode
•
Registering a New Handset to a Base Station
•
Registering a Handset to Another Base Station
•
Possible Reasons for Registration Failure
•
Selecting a Base Station to Connect
•
•
Putting the Base Station into Registration Mode
Before registering the handset, you have to put the base station into registration mode.
Procedure
Long press
on the base station till the registration LED flashes.
The base station is now in registration mode.
Note:
If the base station does not identify a DECT phone within 90 seconds, the registration mode
will switch off automatically.
Registering a New Handset to a Base Station
With one touch, you can quickly register your new handset to a base station.
Before you begin
Make sure the base station is in the registration mode, and the phone prompts "Unregistered!".
Procedure
Press the
Reg
soft key to register the handset.
The handset is searching for a base station in registration mode.
Содержание W70B DECT
