| Advanced Call Features |
43
Pulling a Shared Call on a Shared Line
In the SCA scenario, both you and other users can pull an existing call from another shared phone that is
active or held.
Before you begin
There is an active or held call on the shared line. Contact your system administrator for the call pull feature
access code.
It is not applicable to CP930W.
Procedure
1.
Enter the call pull feature access code (for example, *11).
2.
Press the OK key to dial out.
Voice Mail
Voice Mail feature allows you to leave voice mails for someone or listen to your voice mail messages on
your IP phones. This feature is set up on the server-side and not all servers support this feature.
•
•
•
Setting the Voice Mail Code
If you want to connect to the message center, you need to set the voice mail code on your phone.
Procedure
1.
Navigate to
OK
>
Voice Mail
>
Set Voice Mail
.
On the CP930W, navigate to
Menu
>
Message
>
Set Voice Mail Code
.
On the DD phone, navigate to
Menu
>
Message
>
Voice Mail
>
Set Voice Mail Code
.
2.
On the W56H/W53H/CP930W, select
Enabled
from the
Status
field.
3.
Enter the voice mail code.
4.
Confirm the action.
Leaving Voice Mails
You can leave a voice mail to someone who is busy or inconvenient to answer the call.
Procedure
1.
Follow the voice prompts to leave a voice mail.
2.
Hang up to complete the voice mail.
Listening to Voice Mails
You can listen to your voice mails on the handset directly.
Before you begin
You need to set the voice mail code in advance.