Enterprise IP Phone Getting Started
- 3 -
1)
Attach the Stand, as shown below:
2)
Connect Handset, as shown below:
3)
Connect Network and Power
There are two ways for network and power source connections. You can either connect
the phone to the AC Power directly using the power adapter or to a PoE compliant
switch or hub. Your system administrator will advise you on which one to use.
Note:
1.
If inline power is provided, do not install AC adapter. Make sure the Ethernet cable
and switch/hub are PoE compliant.
2.
The Internet Port can be also connected to Hub/Switch/IP PBX or other internet
devices.
www.voipon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
