Yealink VC110 & VC120 - What to Expect With Your New Purchase
Before The Unit Arrives
Please read this document in its entirety.
Recommended Network Setup
For Yealink units, we recommend* static 1-to-1 NAT configurations.
This configuration has
the video conferencing endpoint on your private network. You will need to create a static
1-to-1 NAT policy from the public side of your firewall to the private side of the LAN.
Some firewalls require you to create an additional policy to translate the private LAN to
the public side of your firewall, please refer to your firewall administration guide or your
firewall manufacturer.
We ask that you ensure any H.323 protocol inspection engines are disabled. This includes,
but is not limited to, H.323, H.245, H.239 and H.225 inspection. Having these protocol
inspection engines enabled usually causes more problems than good, often resulting in
significant packet loss. Please check with your firewall manufacturer on how you can
disable H.323 inspection.
Also ensure that you don't have any pre-existing rules or services that may conflict with
the recommendations given below. We suggest that new, bi-directional rules for the
ports listed below are created and clearly indicated for future reference.
This configuration will be needed for each video system you’ve purchased.
Why do we recommend this?
In our experience, these configurations keep your video system secure on your private
network, while allowing you to seamlessly connect with contacts over the public internet.
Is there anything else required?
Yes, the system includes a camera, microphone, and video codec. A display is not included in
the purchase of the video system. Setup requires a TV monitor (or alternative display) with
HDMI input.
Contact Us
helpdesk.easymeeting.net
