Yealink T48G, Руководство администратора

Страница: 296 / 622

Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series IP Phones
276
Replace Rule File Customization
The replace rule file helps create multiple replace rules. At most 100 replace rules can be added to the IP
phone. It is not applicable to T19(P) E2 IP phones.
You can ask the distributor or Yealink FAE for replace rule file template. You can also obtain the replace
rule file template online:
http://support.yealink.com/documentFront/forwardToDocumentFrontDisplayPage .
Topics
Replace Rule File Attributes
Customizing the Replace Rule File
Replace Rule File Attributes
The following table lists the attributes you can use to add replace rules to the replace rule file:
Attributes Description
Prefix Specify the number to be replaced.
Replace Specify the alternate string instead of what the user enters.
LineID
Specify a registered line to apply the replace rule.
Valid Values: -1~15
-1 stands for Auto (the first registered line);
0~15 stand for line1~line16 (Vary by phone models:
T54S/T48S/T48G/T46S/T46G/T29G: 0~15; T52S/T42G/T42S: 0~11;
T41P/T41S/T27P/T27G: 0~5; T40P/T40G/T23P/T23G: 0~2; T21(P) E2: 0~1)
Multiple line IDs are separated by commas.
Note: This is not applicable to T19(P) E2 IP phones.
Customizing the Replace Rule File
1.
Open the replace rule file.
2.
To add a replace rule, add <Data Prefix="" Replace="" LineID="" /> to the file. Each starts on a new
line.
3.
Specify the values within double quotes.
For example,
<Data Prefix=" 2512 " Replace=" 05922512 " LineID=" 1 " />
4.
Save the changes and place this file to the provisioning server.