Yealink SIP-T4X, Руководство администратора

Страница: 181 / 475

Configuring Advanced Features
165
Variable Value Phone Action
ANSWER Answer a call.
Reset Reset a phone.
ATrans=xxx Perform a semi-attended/attended transfer to xxx.
BTrans=xxx Perform a blind transfer to xxx.
CALLEND End a call.
Note
For security reasons, IP phones do not receive and handle the HTTP/HTTPS GET requests
by default. You need to specify the trusted IP address for action URI. When the IP phone
receives a GET request from the specified IP address for the first time, the LCD screen
prompts the message ―Allow Remote Control?‖. You can specify one or more trusted IP
addresses on the IP phone, or configure the IP phone to receive and handle the URI
from any IP address.
Procedure
Specify the trusted IP address for Action URI using the configuration files or locally.
Configuration File <y0000000000xx>.cfg
Specify the trusted IP
address(es) for sending the
Action URI to the IP phone.
For more information, refer to
Action URI on page 344 .
Local Web User Interface
Specify the trusted IP
address(es) for sending the
Action URI to the IP phone.
Navigate to:
http://<phoneIPAddress>/servl
et?p=features-remotecontrl&q
=load
The variable value is not applicable to all events. For example, the variable value
―MUTE‖ is only applicable when the IP phone is during a call.
When authentication is required, you must enter
―p=login&q=login&username=xxx&pwd=yyy&jumpto=URI&‖ before the variable
―key‖. xxx refers to the login user name, and yyy refers to the login password.