Gigabit Color IP Phone Using the Advanced Phone Functions
Enable LLDP function; the phone will go to switch to get related VLAN parameters
automatically. (Synchronous with VALAN in switch)
To configure LLDP settings via Web interface:
1)
Choose Network->Advanced->LLDP->Active option, in the pull-down menu,
choose enable or disable this function.
2)
Then enter the corresponding Packet Interval in Packet Interval field.
3)
Choose enable or disable the Overwrite Network option.
4)
Click the Confirm button to save the change.
Maintenance Tasks
Administrator Mode
The phone allows two modes to configure the phone:
User Mode
Administrator Mode
Administrator mode grants unlimited access to the phone configuration on both Web
and Phone interface. User Mode cannot set the following options: Advance settings of
accounts, Advance settings of Network, Reset to Factory, other advance phone settings.
To logout via Web interface:
Click the Log Off button in the top right corner.
