Yealink SIP-T23, Руководство по комплектации

Страница: 25 / 321

Getting Started
21
and line ID. The digit 0 stands for all lines. Multiple line IDs are separated by
commas.

At most 100 replace rules can be added to the IP phone.

For the basic expression syntax of the replace rule, refer to Yealink phone-specific
user guide.
To customize a replace rule file:
1. Open the template file using an ASCII editor.
2. For each replace rule you wish to add, add the following string to the file. Each
starts on a separate line:
<Data Prefix=”” Replace=”” LineID=””/>
Where:
Prefix=”” specifies the numbers to be replaced.
Replace=”” specifies the alternate string.
LineID=”” specifies the desired line(s) for this rule. When you leave it blank or enter
0, this replace rule will apply to all lines.
3. Specify the values within double quotes.
4. Save the change.
The following shows an example of a replace rule file:
<DialRule>
<Data Prefix="1" Replace="05928665234" LineID=""/>
<Data Prefix="2(xx)" Replace="002$1" LineID="0"/>
</DialRule>
#Specify the access URL of the custom replace rule file.
dialplan_replace_rule.url =
For example, enter “tftp://192.168.1.100/DialPlan.xml” in the “dialplan_replace_rule.url =”
field. During the auto provisioning process, the IP phone connects to the provisioning
server “192.168.1.100”, and downloads the replace rule file “DialPlan.xml”.
For more information on the parameter, refer to Description of Configuration Parameters
in CFG Files on page 81 .
You can create dial-now rules directly in configuration files, or create multiple dial-now
rules using the supplied dial-now rule template file. The existing dial-now rules on the IP
phones will be overwritten by the downloaded dial-now rules.
When editing a dial-now file, learn the following:

<DialNow> indicates the start of the template file and </DialNow> indicates the
end of the template file.