Yealink MVC660, Руководство по развертыванию

Страница: 70 / 75

| Connecting to Yealink Management Cloud Service/Yealink Device Management Platform |
70
Administrator Account Login
You can sign in as an administrator and manage the device.
Connecting to Yealink Management Cloud Service/Yealink
Device Management Platform
The Yealink RoomConnect plugin running under Windows can automatically detect all the devices of
the MVC/MVC
Ⅱ
system. After logging to the Yealink Management Cloud Service or Yealink Device
Management Platform via Yealink RoomConnect, you can manage or diagnosis all the devices of the MVC/
MVC
Ⅱ
system and view the alarm.
About this task
Note:
For more information on how to manage the devices on Yealink Management Cloud Service/
Yealink Device Management Platform, refer to
Yealink Management Cloud Service for Enterprise
Administrator Guide / Yealink Device Management Platform Administrator Guide .
Procedure
1. Log in as an administrator.
2.
Run the Yealink RoomConnect plugin.
3. Tap from the top-right corner and select Config DM Server .
4.
Select the desired platform.
• If you select
Yealink Management Cloud Service
, enter the enterprise ID.
The enterprise ID can be obtained from the Account Settings on your Yealink Management Cloud
Service.
• If you select
Yealink Device Management Platform
, enter the server address.
5. Enter the name of meeting room.
6.
Select the desired device model.
7. Tap OK .
The system will connect to the Yealink Management Cloud Service/Yealink Device Management
Platform.
Related tasks
Administrator Account Login
Troubleshooting
This section describes solutions to common issues that may occur while using the Yealink MVC/MVC
Ⅱ
system. Upon encountering a case not listed in this section, contact your Yealink reseller for further
support.
• Upgrading System Software
• Firmware for Each Device
• Manually Windows Update
• General Issues