Yealink MVC Series, Быстрый старт

Страница: 5 / 6

8
Upgrading System Software through Windows Update
Enabling Automatically Windows Update
Procedure
1. On the display screen, navigate to More -> Settings .
2. Enter the administrator password (default: sfb) to access Setup screen.
3. Navigate to Windows Settings .
4. Select Administrator from the bottom-left corner and then enter the administrator password
(default: sfb).
5. Tap the Start button, and then go to Settings -> Upgrade & Security -> Windows Update , and
select Advanced options .
6. Enable Automatically download updates, even over metered data connections
(charge may apply) .
The system software(including the Windows, the Camera-Hub/UVC80/UVC50/UVC30 Room, the
MTouch
Ⅱ
) can be automatically upgraded via windows update by default.
Otherwise, you can enable automatically windows update or upgrade the devices manually.
The software upgrade is only supported by the operating system of 64-bit Windows 10.
Manually Windows Update
Procedure
1. On the display screen, navigate to More -> Settings .
2. Enter the administrator password (default: sfb) to access Setup screen.
3. Navigate to Windows Settings .
4. Select Administrator from the bottom-left corner and then enter the administrator password
(default: sfb).
5. Do one of the following:
Long tap the Start button, and then select Device Manager .
Select the desired device and then long tap the device to select Update driver .
Select a desired way to update.
Tap the Start button, and then navigate to Settings -> Upgrade & Security -> Windows Update ,
and select Check for updates .
Select the desired device and then complete the installation.