Yealink MeetingSpace VC880, Руководство пользователя

Страница: 92 / 104

| Settings | 92
Procedure
1.
Do one of the following:
• On your remote control, select More > Input Choose .
• If
on your remote control is set as
Input
key by your system administrator, press to enable the
video input source.
The monitor shows
Camera
and
PC
input sources.
2.
Select the desired input source.
The monitor shows the selected source.
Changing the Video Input Source in a Call
Before you begin
To use PC input source, make sure that your system is connected to a PC.
Procedure
1. Do one of the following:
• Press OK key to open
Talk Menu
, and then select
Input Choose
.
• If
is set to Input key by your system administrator, press to enable the video input source.
The monitor shows
Camera
,
PC
and
PC input
sources.
2.
Select the desired input source.
• If you select PC , the remote video image is shown in big size, and the PC content is shown in small size
(Picture-in-Picture).
• If you select PC , the PC content is shown in big size, and other video images are shown in small
size.
• If you select
Camera
, the remote video image is shown in big size, and the local video image is shown in
small size (Picture-in-Picture).
Changing the Screen Layout
The screen layout depends on the number of connected participants, the display device (single or dual), and whether
the presentation is ongoing.
•
Available Screen Layouts
•
Changing the Screen Layout
• Single Screen Layouts