| Handset Registration |
10
Handset Registration
You need to register your handset to a base station, if you want to use the basic functions of the DECT phone. You can
register a handset to 4 different base stations at most. You can select the desired base to use.
Note:
Up to 8 handsets can be registered to one base station.
Putting the Base Station into Registration Mode
Before registering the handset, you have to put the base station into registration mode.
Long press
on the base station till the registration LED flashes.
The base station is now in registration mode.
Note:
If the base station does not identify a DECT phone within 90 seconds, the registration mode will
switch off automatically.
Registering a New Handset to a Base Station
With one touch, you can quickly register your new handset to a base station.
Make sure the base station is in the registration mode, and the phone prompts "Unregistered!".
Press the
Reg
soft key to register the handset.
The handset is searching for a base station in registration mode.
After the handset is registered successfully, the phone prompts “Handset Subscribed” and “Base NO. (The last 4
characters of the connected Base’s MAC address)”.
After the handset initialized successfully, an icon with the internal handset number and handset name appears on the
phone screen.
Tip:
You can also press and then select the desired base to register the handset. You need to enter the base
PIN (default: 0000) after a base is found.
Related tasks
Putting the Base Station into Registration Mode
Registering a Handset to Another Base Station
You can register the handset to another base station if you want to discard the current registration.
Make sure the base station is in the registration mode.
1.
Go to
Menu
>
Basic Settings
>
Registration
>
Register Handset
.
2.
Select the desired base and then press
OK
.
The handset begins searching for the base station which is in registration mode.
3.
Press
OK
after a base is found.
