Yealink CPE80, Руководство администратора

Страница: 91 / 321

Configuring Network
75
2.
In the
VLAN
block, select the desired value from the pull-down list of
Internet Port
Active
.
3.
Enter the VLAN ID in the
VID (1-4094)
field.
4.
Select the desired value (0-7) from the pull-down list of
Priority
.
5.
Click
Confirm
to accept the change.
A dialog box pops up to prompt that the settings will take effect after a reboot.
6.
Click
OK
to reboot the phone.
To configure VLAN via the remote control:
1.
Select
Menu
->
Advanced
(default password: 0000) ->
Advanced Network
.
2.
In the
VLAN
block, check the
Active
checkbox.
3.
Enter the VLAN ID in the
VID(1-4094)
field.
4.
Enter the priority value (0-7) in the
Priority
field.
5.
Press the
Save
soft key to accept the change.
The display device prompts “Reboot now?”.
6.
Select
OK
to reboot the endpoint immediately.
DHCP VLAN
The endpoint supports VLAN discovery via DHCP. When the VLAN Discovery method is set to
DHCP, the endpoint will examine the DHCP option for a valid VLAN ID. The predefined option
132 is used to supply the VLAN ID by default. You can customize the DHCP option used to
request the VLAN ID.