manualshive.com logo in svg

YDI EtherAnt II, Руководство пользователя

Поделиться
Скачать
YDI EtherAnt II Скачать руководство пользователя страница 26

 

 

EtherAnt II User’s Manual 

10.  What happens if a targeted AP (or Partner) is not discovered? 

When configured for Infrastructure mode (or Wireless Link mode), if the targeted AP (or Partner) is not 
discovered the EC will revert to Peer Group mode after approximately 15 seconds. Thereafter, the EC will 
re-scan for the target every 4 seconds. 
 

11.  How many devices can be attached to the EC if I use the ‘”Dynamic MAC Address” selection? 

When configuring an EC to use Dynamic MAC Address, make sure that only one device is attached to the 
Ethernet port (RJ45).  There are very few instances where you will ever want to use Dynamic MAC. This 
mode disables the Micro-routing feature. 
 

12.  Why do my client devices keep wandering off for Access Points? 

When configuring your APs with the Orinoco AP Manager, under the "Wireless Interface -> Advanced" 
tab there is a parameter called "Distance Between APs". This parameter needs to be set to the default 
value of "Large", meaning there are not many APs covering the area. This keeps client devices from 
easily wandering off looking for other APs if there is any kind of transient interference. 
 
The settings Medium or Small distance between access points require an excellent quality of radio 
communications throughout the entire wireless coverage area. In environments where the actual 
placement of access points was designed to obtain maximum wireless coverage with a minimum number 
of APs, changing the distance between access points from Large to Medium or Small will not yield better 
results. Adversely, doing so might seriously affect the roaming performance of your wireless stations, 
risking network communication errors caused by “out-of-range” situations. 
 
Be also aware that the setting for distance between access points must be the same for all APs in your 
wireless network. A mismatch in the configuration setting for this parameter may have unpredictable 
performance results for wireless (mobile) stations in your network. 
 

Version 3.3 

Page 23 

March 2003 

Содержание EtherAnt II





























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды