ycom eSC S1-X, Руководство пользователя

Страница: 37 / 57

37
| eSC S1-X – User manual
Trolley ELE0115
Dimension Trolley wo fan and display 399*225*554 mm
Trolley with fan and display 399*234*554
Weight Wo external wiring 12.5 kg
ON/OFF Push button yes
Charge mode Switch yes
Communication
Display 4.3 inch 480*272 color LCD-TFT
Buzzer yes
CAN BUS opto isolated 1 channel, 250 kbps
Bluetooth yes
Parameters of BMS Settable by PC yes
Software of communication Windows support yes
Trolley ELE0115
AC Input
AC input voltage range 120-220 Vac
Nominal AC input frequency 50/60 Hz
Nominal AC input current @ 120 Vac 14.7 A
Nominal AC input current @ 220 Vac 8 A
AC Fuse 10.3 X 38 mm Shurter 8020.2051 15 A
Voltage Range min/max 36 ÷ 63 VDC
Minimum voltage measured 1 mV
Current
Maximal continuous charge current @220 Vac 25A
Maximal continuous charge current @120 Vac 22A
Minimum measured current 10 mA
Balance
Type of balance Passive
Minimum balance voltage for single cell 1 mV
Balance current for single cell (max) 84 mA
Overcharge protection Overcharge detection voltage 4205 mV
Overcharge release voltage 4185 mV
Temperature
Number of sensors of temperature (cells) 1
Number of sensors of temperature (PCB) 1
Over temperature max detection threshold 50 °C
Over temperature max detection release 48 °C
Under temperature max detection threshold 0 °C
Under temperature max detection release 5 °C
Time Real time clock yes
Auto power off 15 min
Table 5 – Charger General & Electrical Characteristics
Connect the cables to charger as follow:
1. Switch J1 must be in OFF position
2. Plug in J3 Connector (Power)
3. Plug in J2 Connector (Signals)
4. Plug in J1 Connector (rete)
5. Put Switch J1 in ON position
6. The Display goes ON
There are two ways of use:
•
Monitoring
•
Charging
Switch J1 OFF Switch J1 ON