|
7
|
|
charging LED tracker
|
1
3
2
/
Charging ARYS™ me
1. Connect the USB cable to the ARYS™ tracker charger
and wall hub
2. Connect ARYS™ me to the charger by laying the tracker
flat on top of it. A built-in magnet helps to place the
tracker in the ideal position for charging
3. Wait until the LED turns on. Charging is indicated as
follows on the status LED:
• Charging: LED flashes green every two seconds
• Fully charged (>95 %): LED lights up green
continuously. After a few seconds, the LED turns off
completely and returns to normal mode
Your tracker will be fully charged after approximately
2 hours 15 minutes.
• Do not use other equipment than the ones provided by
yband therapy (excluding the standard USB cable) as
they may result in increased emissions or decreased
device immunity.
• The ARYS™ me tracker and charger should not be used
adjacent to or stacked with other equipment.
• Do not use your ARYS™ me devices within less than
30 cm away from any other devices with RF emissions
(e.g. all smartphones).
Содержание ARYS tracker charger
Страница 1: ...User Manual...
Страница 4: ......
Страница 8: ...8 tracker overview Charger contacts Button Status LED Activity LEDs...