yband therapy ARYS tracker charger, Руководство пользователя

Страница: 64 / 70

| 64 |
| table 6 separation distances |
Table 6: Recommended separation distances table according to IEC 60601-1-2, 3
rd
edition
Recommended separation distances between portable and mobile RF communications equipment and the ARYS™ me
The ARYS™ me is intended for use in the electromagnetic environment in which radiated RF disturbances are
controlled. The customer or user of the ARYS™ me can help prevent electromagnetic interference by maintaining
a minimum distance between portable and mobile RF communications equipment (transmitters) and the ARYS™ me as
recommended below, according to the maximum output power of the communication equipment.
Rated maximum
output power of
transmitter
W
Separation distance according to frequency of transmitter
m
150 kHz to 80 MHz
Not applicable
80 MHz to 800 MHz
d
= 0.35 √
P
800 MHz to 2500 MHz
d
= 0.7 √
P
0.01 – 0.035 m 0.070 m
0.1 – 0.11 m 0.22 m
1 – 0.35 m 0.70 m
10 – 1.1 m 2.2 m
100 – 3.5 m 7 m
For transmitters rated at a maximum output power not listed above, the recommended separation distance
d
in meters
(m) can be estimated using the equation applicable to the frequency of the transmitter, where
P
is the maximum output
power rating of the transmitter in watts (W) according to the transmitter manufacturer.
Note 1: At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
Note 2: These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and
reflection from structures, objects and people.
Note 3: An additional factor of 10/3 is used in calculating the recommended separation distance to decrease the
likelihood that mobile/portable communications equipment could cause interference if it is inadvertently
brought into patient areas.