YBA DESIGN Heritage CD200, Руководство пользователя

Страница: 6 / 14

V Hz W
N
35
UPGRADE
PORT
COAXIAL USB
ANALOG OUTPUT
L
R
XLR - R XLR - L
OUTPUT - DIGITAL - INPUT
COAXIAL
RCA
Designed in France
H e r i t a g e C D 200
C D P L A Y E R
OPTICAL
8 7 1 1 2 4 3 5
Heritage CD200 CD Player
Page 6
www.ybahifi.com
Discovering your CD200: Rear view
4
2
3
RCA Audio output: Connect your amplifier (or any other suitable device such as powered speakers,
receiver, etc) to the RCA outputs of your CD200.
Coaxial digital output: The digital coaxial output allows you to connect an external DAC or a digital
recorder.
USB input (type B): The USB input allows a direct connection to a PC/Mac; The CD200 operation is
fully independent of your computer built-in soundcard and will operate whether your computer has a
soundcard or not. 5
6
7
Coaxial digital input: Connect here any digital source with a high quality COAXIAL interconnect cable
(75 ) designed specifically for digital audio use.
Ω
Balanced Audio output: This is a higher quality output that can reject noise and interference in the
cable when used with equipment with balanced inputs. XLR connectors should be wired:
Pin 1 - Ground; Pin 2 - Hot (in-phase); Pin 3 - Cold (phase-inverted).
1
8
Upgrade port: For service and future improvements. Not for use by end-users.
Power inlet: Use the mains cable provided with your CD200. Be sure the switch is in OFF position
before plugging or unplugging the mains cable.
6
Optical digital input: Connect to optical output from a digital audio source by an optical cable.