Heritage CD200 CD Player
Discovering your CD200: Front view
ON/OFF switch: Use this button to switch ON or switch OFF your CD200.
2
3
2
1
2
Page 5
www.ybahifi.com
ON/OFF: Press this button to switch the CD On/Standby.
STOP/PLAY PAUSE:
up while a disc is playing, reading will Stop. Push the key up when the disc is stopped and it will be
ejected. Push the key down to start reading the disc. If you push the key down while a disc is playing,
it will Pause. Push the key down again to resume playing.
To open or close the drawer push the key to the Stop position. If you push the key
/ : Push the key up to return to previous track. Push the key down to access to next track.
3
5
6
DISPLAY and IR sensor: Any information concerning your CD200
remote control to this zone to control your CD200 from a distance.
will be indicated here. Point the
7
CD DRIVE: Push the Stop/ Play Pause button up to the stop position to open the CD drawer. Place the CD
in the space provided. Push the Stop/ Play Pause button up to the Stop position to close the drawer.
Push the same key down to start reading the disc.
4
CAUTION
Before connecting any input or output.....
Always make sure your CD200 is in the OFF position. If you have any doubt, unplug the AC power cable from
the wall.
Make sure any components connected to your CD Player are off.
Neatly arrange and organize wiring to and from your CD200 and to and from all your components. Separate
AC wires from audio cables to prevent hum or other unwanted noise from being introduced into the system.
1
2
3 4
5
6
7
2
SOURCE selector: Selects between the four different inputs.
