background image

saFeTy

10

8011-520

Never take passengers

Watch for traffic when operating near or crossing 

• 

roadways.
Use extra care when loading or unloading the 

• 

machine into a trailer or truck.
Always wear eye protection when operating 

• 

machine.
Data indicates that operators age 60 years and 

• 

above are involved in a large percentage of riding 
mower-related injuries. These operators should 
evaluate their ability to operate the riding mower 
safely enough to protect themselves and others 
from serious injury.
Follow the manufacturer’s recommendation for 

• 

wheel weights or counterweights.
Anyone who operates this machine must first read 

• 

and understand this operation Manual. Local laws 
may regulate the age of the user.
Keep machine free of grass, leaves or other 

• 

debris buildup which can touch the hot exhaust 
or engine parts and burn. Do not allow the mower 
deck to plow leaves or other debris, causing 
buildup to occur.
Clean any oil or fuel spillage before operating or 

• 

storing the machine.
Allow machine to cool before storage.

• 

WARNING!
Engine exhaust and certain vehicle 
components contain or emit 
chemicals considered to cause 
cancer, birth defects, or other 
reproductive system damage. The 
engine exhaust contains carbon 
monoxide, which is an odorless, 
colorless, poisonous gas. Do not use 
the machine in enclosed spaces.

Содержание ZELKH6125





































































Отзывы: