YATO YT-85080, Руководство пользователя

Страница: 14 / 96

14
GB
O R I G I N A L I N S T R U C T I O N S
SPECIFICATION OF THE PRODUCT
Chain saw is designed only for wood cutting. Due to the electric drive of the saw, it is possible to cut under the roof or near
buildings. Thanks to the rechargeable power supply the chain saw allows you to work in areas, which are not accessible for to
mains-powered products. The chain saw can also be used for trees cutting, however, because of the threat, it is required, that
trees cutting is performed by an experienced user. Correct, Correct, reliable, and safe operation of the device is dependent on its
proper use, therefore:
Prior to working with the tool, you should read all the instruction and keep it around.
For any damages or injuries caused by the tool misuse, resulting from failure to comply with its designation, no compliance
with safety regulations and recommendations included in this manual, the supplier does not accept any liability. The tool misuse
causes also the loss of user’s rights to the guarantee and warranty.
PRODUCT EQUIPMENT
The product is supplied in a complete state, but before its first use requires to be assembled.
Along with the chain saw there are supplied:
- chain guide
- cutting chain
- guide shield
- battery
- charging station
TECHNICAL DATA
Parameter Unit Value
Catalog number YT-85080
Rated voltage [V] 18 DC
Rotational speed [min
-1
] 2500
The length of guide bar [mm /’’] 250 / 10
Chain scale [mm] 9.525
Width of the leading link [mm] 1.27
Chain type 91PJ040X / 91P040X, Oregon
Type of the chain guide 100SDEA041, Oregon
Number of teeth of the chain drive wheel and scale 6 teeth x 9.525 mm
Electric protection class III
Oil tank capacity [ml] 210
Weight [kg] 2.9
Noise level
- L
pA
(pressure) [dB (A)] 80.8 ± 3.0
- L
wA
(power) [dB (A)] 93.6 ± 3.68
Vibration (front handle / rear handle) [m/s 2 ] 2,53 ± 1,5 / 3,80 ± 1,5
Type of the battery Li-ION
Capacity of the battery [mAh] 3000
Energy of the battery [Wh] 54
Charging station
Input voltage
[V] 230~
Mains frequency [Hz] 50
Rated power [W] 42
Output voltage [V] 18 D.C.
Input current [A] 1.7
Time of charging [h] 2
GENERAL SAFETY CONDITIONS
NOTE! Get acquainted with all the instructions below. Failure to observe them may lead to an electric shock, fire or injuries. The
notion of electric tool used in the instructions applies to all the tools which are powered with electric current, both wire tools and
wireless ones.
OBSERVE THE FOLLOWING INSTRUCTIONS