YATO YT-81352, Руководство пользователя

Страница: 16 / 23

OPERATION CONTROL AND CONNECTORS
·The content of dust, acid, corrosive gas in the surrounding air or substance can not
exceed normal standard.
·Take care that there is sufficient ventilation during welding. There is at least 30cm
free distance between the machine and wall.
§4.7 Operation Notices
·Read §1 §4.2 carefully before attempting to use this equipment.
·Connect the ground wire with the machine directly.
·Input power must be AC as one phase, 50Hz, 220/240V. Forbid working in lacking
any phase
DŽ
·In case closing the power switch, no-load voltage may be exported. Do not touch the
output electrode with any part of your body.
·Before operation, no concerned people should be left. Do not watch the arc in
unprotected eyes.
·Ensure good ventilation of the machine to improve duty ratio.
·Turn off the engine when the operation finished to economize energy sources.
·When power switch shuts off protectively because of failure. Don’t restart it until
problem is resolved. Otherwise, the range of problem will be extended.
14