YAT YT5601-01, Инструкция по сборке

Страница: 49 / 61

48
EN
SAFETY INSTRUCTIONS
b) Allow the engine to cool before
storing in any enclosure;
c) Replace worn or damaged parts for
safety;
• Maintain or replace safety and
instruction labels.
• Disengage all controls, stop the
engine, and wait until the tines
come to a complete stop before
cleaning, repairing, or inspecting
the cultivator.
• Regularly check the following:
i) Tines are clear and can rotate freely
– Accumulation of debris around
the tines could impair performance
or damage the motor. Inspect and
clean the area around the tines
before every use.
ii) Safety devices are operating
properly – Do not tamper with or
adjust safety devices.
iii) Bolts and screws are properly
tightened – Visually inspect the
machine for any damage and
ensure that the cultivator is
in safe working condition.
iv) Use only identical replacement
parts – Always replace damaged
parts with original equipment
manufacturer’s parts only.
Replacement parts that do not
meet the original equipment
specifications may lead to improper
performance and compromise
safety.
• Always use proper care and good
judgment when you are confronted
with a situation that is not covered
in this manual.
• Do not use in rain or wet conditions.
• Do not grasp the exposed
cutting blades or cutting edges
when picking up or holding the
appliance.
Stopping Work
• Always turn the cultivator
OFF and disconnect the electrical
power when stopping work or
when changing work areas. Never
leave the machine running when
unattended.
• The tines will continue to rotate
for a short period after turning
OFF the cultivator. Wait
until the tines have completely
stopped before lifting the machine
or conducting inspection and
maintenance.
• The motor housing remains
hot for a short period after the
machine is turned OFF. Allow the
motor housing to cool completely
before touching or storing near
combustible material.
Maint Storage
a) Keep all nuts, bolts and screws
tight to be sure the equipment is in
safe working condition;