YASKAWA Z1000 CIMR-ZU*A Series, Техническое руководство

Страница: 71 / 466

Type Signal Name Description Specification
Digital Outputs
120 Vac
DO-1 Digital Output 1
(Factory use only) 120 Vac, 66 VA sealed, 1650 inrush
DO-2 Digital Output 2
DO-3 Digital Output 3
DO-4 Digital Output 4
DO-5 Digital Output 5
Digital Outputs
DO-6 Digital Output 6
Relay, dry contact form C, 30 Vdc or 120 Vac,
DO-6 (factory use only), 3.7 Amp 360 VA,
DO-7 to DO-10 for customer use, 2 Amp
DO-7 Digital Output 7
DO-8 Digital Output 8
DO-9 Digital Output 9
DO-10 Digital Output 10
Table 3.8 lists the available control circuit input terminals on the drive. Text in parenthesis indicates the default setting for
each multi-function input.
The drive control circuit terminals on Terminal Board A1 are arranged as shown in
Figure 3.20 .
TB3
+V AC A1 A2 FM AM AC
Figure 3.20 Control Circuit Terminal Board A1 Arrangement
Table 3.8 Drive Control Circuit Terminal Board A1
Type No. Terminal Name (Function) Function (Signal Level) Default Setting Page
Frequency
Reference
Inputs
+V Power supply for analog inputs 10.5 Vdc (maximum allowable current 20 mA) 196
A1
Multi-function analog input 1
(Frequency reference bias)
• 0 to 10 Vdc/100% (input impedance: 20 kΩ)
• 4 to 20 mA/100%, 0 to 20 mA/100% (input impedance: 250 Ω)
• Voltage or current input must be selected by Jumper S1 and H3-01.
196
160
A2
Multi-function analog input 2
(Frequency reference bias)
• 0 to 10 Vdc/100% (input impedance: 20 kΩ)
• 4 to 20 mA/100%, 0 to 20 mA/100% (input impedance: 250 Ω)
• Voltage or current input must be selected by Jumper S1 and H3-09.
196
196
162
AC Frequency reference common 0 V 196
FE Ground for shielded lines and option cards – –
External Power
Supply
+P External Power Supply 24 V (Max. 150 mA) –
3.5 Control Circuit Wiring
YASKAWA ELECTRIC SIEP YAIZ1B 01E YASKAWA AC Drive – Z1000 Bypass Technical Manual 71
3
Electrical Installation