n
Set Ethernet parameters
The dialog field for pre-setting an Ethernet address can be found
in
‘Start
è
Settings
è
Network and Dial-up Connections ’
. The
default setting is address assignment via DHCP.
n
System properties (System)
Here you receive information about the version of the current Win-
dows
Ò
operating system, the memory load and sharing (altera-
tions here are not accepted into the registry) and the copyright.
The register
Device Name
allows you to change the device name
that is shown during Ethernet communication for instance.
Please note that changes are set back after PowerOFF-
PowerON. To store them permanently into the registry file
you have to store them explicitly. For this call ‘Start
è
Programs
è
KuK_Tools
è
KuK Tools’ [Store].
The dialog window where to configure the integrated MPI interface
can be found under
‘Start
è
Settings
è
Control Panel
è
MPI Configuration’
.
n
HSA
Here you set the highest MPI address (highest station address).
Within a MPI network the highest MPI address must be identical!
n
TS
With TS (this station) you set the local MPI address for the Touch
Panel.
n
Baud Rate
Enter here the transfer velocity of your MPI net. The baud rate has
to be identical for every MPI participant within the network.
According to the Baud Rate the network parameters are set.
n
Default Net Parameters
It is recommended not to alter the Default Net Parameters that are
set by the baud rate.
n
Status
The status of the MPI interface is monitored via Status as "Off-
line", "Online" or "Error".
Here made changes are also not saved after PowerOFF-
PowerON. Save the data permanently in the current reg-
istry file via [Store] under ‘Start
è
Programs
è
KuK_Tools
è
KuK Tools’.
Set MPI parameters
VIPA HMI Touch Panel
Deployment Touch Panel
Operating system Windows
Ò
Embedded CE 6.0 Prof. > Structure
HB160 | TP | 62K-JEE0 | GB | 14-38
37
