3
Deployment Touch Panel
3.1 Installation
The Touch Panel is suitable for the installation in operating tables and
control cabinet fronts. The installation happens via the back. The
Touch Panel is provided with a patented integrated fixing technique
that allows an easy connection with a simple screwdriver.
Due to the fact that the Touch Panel has a plug connector for bus
connection and voltage supply, a fast and easy device change is pos-
sible.
For the installation into a operating tableau and control cabinet fronts,
the Touch Panel requires the following front plate cutting:
Touch Panel
W x H in mm
62K-JEE0-...
287 x 217
The fixing technique is integrated in the casing of the Touch Panel
and accessible via the back. For the installation, a small slit screw-
driver is required
1.
Push the operator panel [3] from the front side into the front
panel cutting [1] until it touches the panel with the seal [2].
2.
Now bolt the lever [5] clockwise with the screwdriver [4] until it
rotates to the outside.
3.
Further screwing bolts the lever to the front panel until it holds
this to the control cabinet front.
Overview
Installation cutting
Installation
VIPA HMI Touch Panel
Deployment Touch Panel
Installation
HB160 | TP | 62K-JEE0 | GB | 14-38
23
