YASKAWA
TOEP C730600 0EA Modbus TCP/IP Installation Manual
27
3.
Install the option (A) into the CN5 connector (C) on the drive and use one of the
included screws (B) to put it in place.
A - Option
B - Included screw
C - Connector CN5
Figure 5.11 Install the Option
4.
Use one of the remaining included screws (B) to connect one end of the ground
wire (C) to the ground terminal (A). Use the last remaining included screw (B) to
connect the other end of the ground wire (C) to the remaining ground terminal and
installation hole on the option (A).
Tighten the screws to a correct tightening torque:
• 0.5 N
∙
m to 0.6 N
∙
m (4.4 in
∙
lb to 5.3 in
∙
lb)
