YASKAWA SGDV-OSA01A, Руководство пользователя

Страница: 53 / 57

900-200-100 53/57
12.3.2.
∑-7W
Parameter
No.
SIZE Name Setting Range Units
Factory
Setting
When Enabled
Pn518
2
Output Signal
Selection 7
－ － 0000
After resetting the
system or
recalculating
parameters
Active Mode ON Signal Mapping
Digit
0
0 Disabled (the above signal output is not used).
1
Axis A: Output the signal from the CN1-1 and CN1-2 output terminals.
Axis B: Output the signal from the CN1-23 and CN1-24 output terminals.
2
Axis A: Output the signal from the CN1-25 and CN1-26 output terminals.
Axis B: Output the signal from the CN1-27 and CN1-28 output terminals.
3～6 Reserved settings (Do not use.)
1
Refer to the SERVOPACK manuals. 2
3
Pn5BF
2
/ACT_MOD (Active
Mode On ) Signal
Allocation
－ － 0000
After resetting the
system or
recalculating
parameters
Allocated Pin Number
Digit
0
～
2
000 Disabled (the above signal output is not used).
001 Allocate the signal to CN1-1 and CN1-2.
023 Allocate the signal to CN1-23 and CN1-24.
025 Allocate the signal to CN1-25 and CN1-26.
027 Allocate the signal to CN1-27 and CN1-28.
029 Allocate the signal to CN1-29 and CN1-30.
Polarity Selection
Digit
3
0 Disabled (the above signal output is not used).
1 Output the above signal.
2 Invert the above signal and output it.