4 System Startup and Sample Programs
4.3.2 Reading Sample Programs and Setting and Saving Parameters
4-36
3.
Select
File - Execute
.
Click the
Yes
Button in the confirmation dialog box to start the file transfer. When the transfer has been
completed, a confirmation dialog box will appear again. Click the
OK
Button.
4.
Select
File - Exit
in the
Individual Load
Window to exit the transfer.
( 4 ) Set and Save Motion Fixed Parameters
This section describes the procedure for setting motion fixed parameters for axes 1 and 2 to match the sample program .
When using a program, set the fixed parameters to match the devices being used. Refer to
Machine Controller
MP2000 Series Built-in SVB/SVB-01 Motion Module User’s Manual
(Manual No.: SIEPC88070033).
1.
Double-click the
2300SMPL
Controller Folder -
Definition Folder
in the
File Manager
Window to
display the five folders contained within it. Double-click the
Module Configuration
Folder.
.
The
Enginnering Manager
Window will open and the
Module Configuration
Window will appear.
