MP/INVERTER/SERVO Ethernet Driver
GP-Pro EX Device/PLC Connection Manual
69
Settings of External Device
Use the ladder software (MP720 Ver.7) to set up communication settings. Set the next contents.
(1) Main CPU settings
(2) Sub CPU settings
(3)
-7 series settings
For details on communication settings, please refer to the manual of the External Device.
Main CPU Settings
1
Start the ladder software.
2
Make a project file. Select the main CPU models from [Model].
3
From the tree view, double-click [Module Configuration].
[MC-Configurator] starts.
4
Double-click [218IFD] on the CPU to use.
5
Click [Parameters] tab.
6
Set "IP Address" and "Subnet Mask" of "Transmission Parameters".
7
Double-click the number of module which attaches a sub CPU in [MC-Configurator].
8
Select a sub CPU to be used in the [Module] dialog box, and click [OK].
9
Set "5" to the circuit number of Sub CPU that displayed in the [MC-Configurator].
Set up the same value as the Display’s circuit number.
10
Write the settings to the External Device.
Sub CPU Settings
1
Start the ladder software.
2
Make a project file. Select a Sub CPU to be used from [Model].
3
From the tree view, double-click [Module Configuration].
[MC-Configurator] starts.
4
Expand [SVC] of Sub CPU, and double-click [01 UNDEFINED].
5
Select the using
-7 series of [Slave] dialog box, and click [OK].
6
Set "1" to the circuit number of [SVC].
7
Set "3" to the station address of the added
-7 series.
Setup Items
Setup Description
IP Address
192.168.0.1
Subnet Mask
255.255.255.0
• To write the settings, select the [Save to flash after transferring to the controller] check
box.
If the data is transferred without selecting the check box, the transferred data is
deleted when restarting the External Device.
