MP/INVERTER/SERVO Ethernet Driver
GP-Pro EX Device/PLC Connection Manual
44
Settings of External Device
Use the ladder software (MP720 Ver.7) to set up communication settings.
For details on communication settings, please refer to the manual of the External Device.
1
Start the ladder software.
2
Make a project file. Select the main CPU models from [Model].
3
From the tree view, double-click [Module Configuration].
[MC-Configurator] starts.
4
Double-click [218IFD] on the CPU to use.
5
Click [Parameters] tab.
6
Set "IP Address" and "Subnet Mask" of "Transmission Parameters".
7
Double-click the module number corresponding to the option slot which attaches MPU-01 in the [MC-
Configurator]
8
Select [MPU-01] in the [Module] dialog box, and click [OK].
9
Set "3" to the circuit number of MPU-01 that displayed in the [MC-Configurator].
Set up the same value as the Display’s circuit number.
10
Write the settings to the External Device.
Notes
•
Check with a network administrator about IP address. Do not set the duplicate IP address.
Setup Items
Setup Description
IP Address
192.168.0.1
Subnet Mask
255.255.255.0
• To write the settings, select the [Save to flash after transferring to the controller] check
box.
If the data is transferred without selecting the check box, the transferred data is
deleted when restarting the External Device.
