YASKAWA Motoman XRC, Руководство по эксплуатации функций

Страница: 27 / 36

3.1 Axis Operation
3-3
3.1.2
Single Motion Mode
In this mode, the master axis and the slave axis move individually.
When the specified external input status is ON, each axis moves in a single motion.
[Example] For TWIN-2
Press the 1st axis key or the 2nd axis key to move the corresponding axis only.
3.1.3
Precautions
Select either the twin motion mode or the single motion mode by external input before starting
the axis operation.
The motion mode does not change when the external input status is changed while an axis
key is pressed.
The motion mode is determined according to the external input status that exists when the
axis key is pressed, not after.
Pressing the master axis key
moves only the master axis.
Master axis
Slave axis
Pressing the slave axis key
moves only the sub axis.
Master axis
Slave axis
X+
S+
X-
S-
Y-
L-
Y+
L+
Z-
U-
Z+
U+
x
R- x
R+
y
B-
y
B+
z
T-
z
T+
X+
S+
X-
S-
Y-
L-
Y+
L+
Z-
U-
Z+
U+
x
R- x
R+
y
B-
y
B+
z
T-
z
T+