5 Installation Procedure
30
YASKAWA ELECTRIC
TOBP C730600 86F YASKAWA AC Drive Option SI-T3 Installation Manual
6.
Reattach the LED Status Ring board (H).
Use the open space provided inside the LED Status Ring board to route option
wiring.
NOTICE:
Do not pinch cables between the front cover or the LED Status Ring board and the drive. Failure
to comply could cause erroneous operation.
7.
Reattach the drive front cover (D) and the keypad (F).
Figure 18
Figure 17 Replace the Front Cover and Keypad
8.
Set drive parameters in
for correct option performance.
A10
H
Keypad
connector
Tab
Install the keypad to the drive after replacing
the keypad connector and then the keypad
connector. At that time, insert the keypad
connector tab into the drive.
D
F
TOBP_C730600_86F_7_0_E.fm 30 ページ ２０１８年１２月２０日 木曜日 午後６時１６分
