6 Check after Energizing the Drive
YASKAWA
TOEPC7306000BA HOA Keypad Installation Manual
33
Note:
When a fault, minor fault, or an error occurs, push
to show the content of
the fault. Push
again to show the standard monitor (
Ux-xx
).
■
Change the Frequency Reference Value
1.
Push
to access the screen to change the frequency.
2.
Push
or
to select the digit, then push
or
to change the value.
3.
Push
to keep the changes.
Note:
The HOME screen must show
U1-01 [Frequency Reference]
or you must set
b1-
01 = 0 [Frequency Reference Selection 1 = Keypad]
to use this function.
■
Show the Main Menu
Push
to show the main menu. Push
(HOME) to go
back to the HOME screen.
◆
Show the Monitors
This section shows how to show the standard monitors (
Ux-xx
).
1.
Push
(Home) to show the HOME screen.
Note:
• When the drive is in HOME Mode, the screen shows [Home] in the upper
right-hand corner of the screen.