6 Check after Energizing the Drive
30
YASKAWA
TOEPC7306000BA HOA Keypad Installation Manual
Table 6.1 Display Status after Energizing the Drive
Status
Display
Description
During Usual
Operation
Initial Setup Screen
or
HOME Screen
•
The data display area will show the
Initial Setup screen or the HOME
screen
•
Energize the drive with factory
defaults to show the Initial Setup
screen. Select [No] from the [Show
Initial Setup Screen] settings to show
the HOME screen without showing
the Initial Setup screen.
When the
Drive Detects a
Fault
The display changes depending on the
fault. Refer to
“
Troubleshooting
”
to
remove the cause of the fault.
will illuminate.
Note:
If the screen shows a different screen,
do these steps to show the fault
content again:
1.
Push
from the HOME
screen.
2.
Push
(Home) from a
different screen than the HOME
screen.
Note:
Make sure that you use a keypad with FLASH number 1004 or later. Keypads with
FLASH numbers 1003 and earlier will not show characters correctly.
