YASKAWA JVOP-KPLCB04AxB Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 62

YASKAWA JVOP-KPLCB04AxB Скачать руководство пользователя страница 15

5 Installation Procedure

YASKAWA

TOEPC7306000BA HOA Keypad Installation Manual

15

Table 5.1 Keypad Installation Method

Installation Method

Features

Necessary Tools and

Installation Support

Sets

Outside of the control
panel

Simplified installation is
possible. Separate
installation support sets are
not necessary.

Phillips screwdriver #2
(M3)

Inside of the control panel

Keypad does not extend
farther than the front of the
control panel.

•

Phillips screwdriver #2
(M3, M4)

•

Installation support set
A (for mounting with
screws, model: 900-
192-933-001)

•

Phillips screwdriver #2
(M3)

•

Wrench (M4)

•

Installation support set
B (for mounting with
nut clamp, model: 900-
192-933-002)

Note:

Installation support sets are sold separately. If there are weld studs inside the
control panel, use installation support set B. Contact Yaskawa or your nearest sales
representative to make an order.

NOTICE

Do not let unwanted objects, for example metal

shavings or wire clippings, fall into the drive during drive installation. Put a
temporary cover over the drive during installation. Remove the temporary cover
before start-up. Unwanted objects inside of the drive can cause damage to the
drive.

■

Optional Items

The optional extension cable and installation support set are
necessary for Internal/Flush-Mount installation.

Contact Yaskawa or your nearest sales representative to order
optional items.

«
...
13
14
15
16
17
...
»

Содержание JVOP-KPLCB04AxB































































Отзывы:

Нет отзывов