Introduction
Page 1
The Ethernet Network Card is used for monitoring and controlling purposes. The Ethernet Net-
work Card supports industry standard Modbus RS485 communication and TCP/IP protocol.
When used with an Internet connection, it can send data to an online portal from where up to 32
inverters can be monitored. It can also be used to remotely update the inverter firmware.
Capabilities
● Remote inverter firmware upgrade support by Yaskawa Solectria Solar (YSS).
● Remote diagnostics by YSS Technical Support & Service.
● Direct customer data from the Ethernet Network Card via a programmable Ethernet XML
Sunspec Data Exchange connection for customers who want to manage their own data directly.
● Pass-thru Modbus communications to a third-party gateway.
General data
Voltage supply
Connections
Communicate to
Modbus daisy chain
Third-party data logger
Cloud service
Third-party server
Raw data client
RS485 port A
RS485 port B
Pass-thru
Ethernet
WiFi module
Isolated RS485, Max. 32 devices
Pass-thru port, Isolated 3 Pin RS485
Ethernet port, MQTT
Ethernet port, HTTPS
Ethernet port, Modbus/TCP
Internal installation, RS485+DC Input, 6 Pin
External installation, RS485+DC Input, 5 Pole 3.5 mm pitch EDG
Only one effective at the same time between port A and B
RS485, 3 Pole, A+ / B- / G
RJ45, 10Base-T / 100Base-T
4Pin connector
Input voltage
Power consumption
9 ~ 24 Vdc
< 1 W, Max. 5 W
Ambient conditions
Degree of protection
Ambient temperature
Relative humidity
Installed in inverter wire-box or 3rd party enclosure
-40
√
to +85
√
, Natural convection
< 85%, Non-condensing
Dimensions ( W/H/D)
Weight
Status display
140 mm / 70 mm / 15 mm
50 g
LEDs for Activity, Cloud, RS485 and Power
