Page 10
Open the firewall ports before commissioning !
If a firewall is used to protect the network, the following ports must be opened
both ways (incoming and outgoing communications):
TCP 1883 with destination IP 47.254.52.209
The following outgoing ports must be opened :
TCP 443 with destination solrenview.com
(IP 209.160.64.80)
if the firmware of ENC installed is lower than 1.6000, the following port must be
opened both ways:
TCP 80 and 88 with destination IP 47.254.31.163
If the user cannot have these ports open, remote diagnostics and firmware
updates will not be available.
It is recommended to use a separate modem/router so that the inverters’
network is not part of the high security network used on the site.
