YASKAWA
TOEP C730600 84A DeviceNet Installation Manual
37
A - Drive grounding terminal (FE)
B - Included screw
C - Ground wire
D - Stud
Figure 5.23 Connect the Ground Wire
5.
Install the option (A) into the CN5-A connector (C) on the drive and use one of the
included screws (B) to put it in place.
Tighten the screw to a correct tightening torque:
• 0.5 N
∙
m to 0.6 N
∙
m (4.4 in
∙
lb to 5.3 in
∙
lb)
Note:
1.
Only two screws are necessary to install the option on an FP605 drive.
2.
The option package contains three screws and one ground wire.
