manualshive.com logo in svg

YASKAWA CIMR-E7 series, Техническое руководство

Поделиться
Скачать
YASKAWA CIMR-E7 series Скачать руководство пользователя страница 3

 

ii

 

Introduction 

This manual explains the specifications and handling of the Yaskawa 

L

ON

W

ORKS

 Option 

for the Yaskawa models E7, P7, F7 and G7 drives. The 

L

ON

W

ORKS

 Option 

connects the drive to a L

ON

W

ORKS

 network and facilitates the exchange of data utilizing the LonTalk

 protocol. In this 

document, the word “inverter”, “ac drive” and “drive” may be used interchangeably.  

To ensure proper operation of this product, read and understand this manual. For details on installation and operation of the E7, P7, F7 and G7 

drives, refer to the appropriate drive’s user and/or technical manual. All drive manuals and support files can be found on the CD that came with 

the drive. They are also available for download at 

www.drives.com.

 

For information on L

ON

W

ORKS

 contact the Echelon at 

www.echelon.com

.

 

L

ON

W

ORKS

 Option Installation Guide

 document reference 

IG.AFD.20 

E7 User Manual

 document reference 

TM.E7.01 

E7 Programming Manual

 document reference 

TM.E7.02 

E7B Drive/Bypass technical Manual 

document reference 

TM.E7B.01

 

F7 User Manual

 document reference 

TM.F7.01 

F7 Programming Manual

 document reference 

TM.F7.02 

F7 Parameter Access Technical Manual

 document reference 

TM.F7.11 

P7 User Manual

 document reference 

TM.P7.01 

P7 Programming Manual

 document reference 

TM.P7.02 

G7 Technical Manual

 document reference 

TM.G7.01 

GPD is a trademark of Yaskawa, Inc. 

MODBUS

 is a registered trademark of Schneider Automation, Inc. 

L

ON

W

ORKS

 , Lon

 , LonBuilder

 , LonTalk

 and LonManager

 are registered trademarks of Echelon Corporation. 

LonMaker, LonMark, LonLink and NodeBuilder are trademarks of Echelon Corporation. 

All other trademarks are the property of their respective companies or organizations. 

 

Note: Installing 

the 

L

ON

W

ORKS

 Option

 on an F7 or G7 drive obstructs the 3CN and 4CN connectors. This means that I/O and encoder 

feedback options cannot be installed concurrently with the 

L

ON

W

ORKS

 Option

 on an F7 or G7 drive. 

When used on a F7, G7 or P7 drive, the drive will appear as an E7 on the network. 

 

Содержание CIMR-E7 series
















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды