manualshive.com logo in svg

YASKAWA AI-A3, Руководство по установке

Поделиться
Скачать
YASKAWA AI-A3 Скачать руководство пользователя страница 5

1  Preface and Safety

YASKAWA ELECTRIC

 TOBP C730600 78D YASKAWA AC Drive Option AI-A3 Installation Manual

 5

Terms

Registered Trademarks

Trademarks are the property of their respective owners.

Supplemental Safety Information

Read and understand this manual before installing, operating, or servicing this option. Install 

the option according to this manual and local codes.
The following conventions indicate safety messages in this manual. Failure to heed these 

messages could cause fatal injury or damage products and related equipment and systems.

Note:

Indicates supplemental information that is not related to safety messages

Option:

 

YASKAWA AC Drive Option Analog Input

Drive:

• YASKAWA AC Drive 1000-Series (A1000, U1000)
• YASKAWA AC Drive GA700
• YASKAWA AC Drive GA800
• YASKAWA AC Drive CR700
• YASKAWA AC Drive CH700
• YASKAWA AC Drive FP605

Keypad:

• LCD Operator for YASKAWA AC Drive 1000-Series
• LED Operator for YASKAWA AC Drive 1000-Series
• LCD Keypad for YASKAWA AC Drive GA700, GA800, CR700, CH700, and FP605
• LED Keypad for YASKAWA AC Drive GA700, GA800, CR700, CH700, and FP605

DANGER

Indicates a hazardous situation, which, if not avoided, will cause death or serious 
injury

.

W ARNING 

Indicates a hazardous situation, which, if not avoided, could cause death or serious 
injury. 

GEM_IO_conditional_E - コピー.fm  5 ページ  ２０２２年１月１９日　水曜日　午前９時５６分

Содержание AI-A3


























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды