Closing the VNC window terminates the VNC connection, the server
keeps running.
3.8 Access to the network resources
The Touch Panel allows you to access shared resources in a Micro-
soft network like drives and printer. Here you may assign existing
public directories or printer in the network to local directories or printer
in the Touch Panel.
Condition for this is that you are logged in to the network with your
user name and password. The assignment of a network resource is
performed in the Touch Panel via the command console "Command
Prompt". Start the command console with
‘START
è
Programs
è
Command Prompt’
.
The access to the network resource is performed with the commands
Net view
and
Net use
.
Shared resources of a network PC can be listed by the command: \>
net view PC-Name
For example
net view testserver
lists all shared resources of
the network PC "test server". To test the physical connection a PING
to the IP address of the network PC may be executed if there are
problems while contacting the network PC.
The connection of a local name at the Touch Panel with a shared
drive of the network PC happens with the following approach:
1.
Enter the following in the command prompt: \>
net use
local_name \\network drive /user:User name
2.
Enter
user name, password
and where app.
user group
.
After successful login the following message appears:
‘Successfully
mapped to network name’
.
The connected network drive is then available on the Touch Panel
with the
local_name
via
My Device
at
Network
.
Local_Name:
data
, network drive:
testserver\archive
, User-
name:
guest
Input:
\> net use data \\testserver\archiv /
user:guest
The connected network drive is then available via \network\data at the
Touch Panel.
Overview
List released resources
Connect net drive
Example:
VIPA HMI
Deployment Touch Panel
Access to the network resources
HB160 | TP-ECO | 62E-MDC0 | GB | 16-02
38
