At the first startup of the
VIPA Startup-Manager
the following
start
screen
appears.
There is a button on the
initial screen
with a counter, which counts
backwards. If you click on this button within this time, you may return
to the
selection menu
. If the time expires, the project will start auto-
matically.
A delay time of 5 seconds is default. In the
selection menu
at "Autos-
tart" you can adjust this time.
There are following buttons in the
selection menu
:
n
Settings
n
Info/Update
n
Autostart
n
Exit
n
Back
In [Settings] the system settings like brightness and contrast of the
display can be preset or the display can be re-calibrated. Here the
MPI/DP slave interface may also be configured. Further you get here
the Touch Panel information: product number, serial number and
licenses.
To execute the firmware update press the button [Info/Update]. After
clicking on [Info/Update] the current image is displayed under "image
version" with panel name, creation date and version number.
With [Make Screen Shot] you can make a screen shot of the panel
information and select a destination for its storage.
With [Search Image] a list of all the firmware images is shown, which
are available on the panel and connected storage media. These
images will be listed with create data and version number. Choose
your new image.
Start screen
Selection menu
Settings
Info/Update (firmware)
VIPA HMI
Deployment Touch Panel
Commissioning> VIPA Startup-Manager
HB160 | TP-ECO | 62E-MDC0 | GB | 16-02
24