iii
Using this Manual
This manual describes MP2000 Series Machine Controller
EtherCAT Module 264IF-01. Read this manual thoroughly before using 264IF-01. Keep this manual in a safe place for
future reference.
Basic Terms
Unless otherwise specified, the following definitions are used:
Manual Configuration
This manual consists of the chapters listed in the following table. Read the chapters of this manual as required by the
purpose.
MPE720 Engineering Tool Version Number
In this manual, the operation of MPE720 is described using screen captures of MPE720 version 7.
For this reason, the screen captures and some descriptions may differ for MPE720 version 5 or version 6.
Graphic Symbols Used in this Manual
The graphic symbols used in this manual indicate the following type of information.
Indication of Reverse Signals
In this manual, the names of reverse signals (ones that are valid when low) are written with a forward slash (/) before
the signal name, as shown in the following example:
<Notation Examples>
• MP2000 Series Machine Controller:
MP2100M, MP2200, MP2300, MP2310, and MP2300S Machine Controllers
• PLC:
Programmable Logic Controller
• MPE720:
The Programming Device Software or a personal computer running the
Programming Device Software
Purpose
Chapter
Selecting
Models and
Peripheral
Devices
Studying
Specifications
and Ratings
Designing
the
System
Panel
Installation
and Wiring
Trial
Operation
Maintenance
and
Inspection
Chapter 1 EtherCAT
−
−
−
−
Chapter 2 264IF-01 Module
Chapter 3 Mounting and Starting
the Module
−
Chapter 4 EtherCAT Detail Defi-
nition
−
−
Chapter 5 Operation Specifica-
tions of the Module
−
Chapter 6 Troubleshooting
−
Appendices
−
−
−
−
This symbol is used to indicate important information that should be memorized or minor precautions,
such as precautions that will result in alarms if not heeded.
S-ON =
/S-ON
P-CON
=
/P-CON
