Yardworks 60-3982-0, Руководство пользователя, Страница: 9 / 18

9
OPERATING INSTRUCTIONS
Using the Snow Thrower
1. Start the Snow Thrower by following the Starting instructions. The depth and weight of the snow will determine
the forward speed.
2. Push the Snow Thrower forward so that it rides on the scraper.
3. Verify that the power cord is attached to the cord retainer and that it rests on the guide bar. The power cord
should trail to the side of the operator.
Starting the Snow Thrower
WARNING: Avoid accidental start-ups. Verify that the operator is in the starting position when using the
snow thrower. In order to avoid serious injury, the operator and unit must be in a stable position when
starting the Snow Thrower.
Using the Switch
Caution: Do no attempt to override the operation of this safety switch.
This Snow Thrower is equipped with a special safety switch. In order to operate the switch, insert one finger into
the opening, and push the lever out so that it can be grasped along with the upper handle. Pull the lever back in
order to turn the Snow Thrower on, and hold it against the upper handle in order to keep it running. To turn the
Snow Thrower off, simply release the lever.
PLUG
CORD
RETAINER
Attach the outlet end of an extension cord to the plug
on the rear of the snow thrower.
Make a loop in the extension cord. From the right side,
pass the loop through the hole in the back of cord
retainer and place it around the hook.
Using the cord retainer