manualshive.com logo in svg

Yardworks 60-3982-0, Руководство пользователя, Страница: 12 / 18

Поделиться
Скачать
Yardworks 60-3982-0 Скачать руководство пользователя страница 12

12

MAINTENANCE

Impellor replacement

1. Remove the nut from the left hand side of 

    the impellor shaft.

4. Remove the washer and the screw.

7. Remove the pulley and belt.

10. Withdraw the old/damaged impellor.

      Be sure to keep the 2 spacer washers 

      from the right hand side of the impellor.

11. Insert the impellor shaft in the new 

      impellor and place the 2 washers on the 

      right hand side.

12. Place the impellor and shaft back into the 

      front scoop.

8. Remove the impellor shaft nut from the 

    right hand side.

9. Withdraw the impellor shaft from the left 

    hand side.

2. Remove the 10 screws from the side cover.

3. Be sure not to lose the 2 springs.

5. Remove the nut from the impellor shaft.

    Remove the 3 screws holding the pulley 

    support plate.

6. Remove the plate and the two spacer 

    washers.

1

2

3

4

5

6

7

8

9

10

11

12

spring

spacer washer

spacer washer

washer and screw

Содержание 60-3982-0



















Отзывы:

Нет отзывов