•
Place the shift lever in the fastest for-
ward position. Push the shift rod and
shift arm assembly down sharply, as far
as it will go, to put the drive into the
fastest forward position. Thread the fer-
rule in or out on the shift rod as
necessary until the ferrule lines up with
the hole in the shift lever as shown in
Figure 9. Insert ferrule in the hole
shown and secure with flat washer (R)
and internal cotter pin (G).
NOTE:
Another counter clockwise
turn on the ferrule may be neces-
sary if the unit does not engage
into first gear properly.
8
FIGURE 8
Flat Washer (R)
Shift Rod
Cotter Pin (G)
Shift
Arm
Assembly
FIGURE 9
Upper Shift Rod
Cotter
Pin (G)
Flat Washer (R)
Ferrule (K)
FIGURE 10
* Trigger
Assembly
Outside
cut-out
Inside
cut-out
Cable Tie
Shift Rod
Flat Washer (R)
Cotter Pin (G)
Flat Washer (R)
Ferrule (K)
* Oval Truss Head
Machine Screw (M)
Clutch lever in
release position
Shift Arm
Assembly
Cotter Pin (G)
* Steering
Cable
*
optional
