background image

model no. 060-3891-6  |  contact us: 1.866.523.5218

18

Additional Safety Rules for Blowers

•  Always wear adequate protective 

clothing when operating the tool to 

avoid injuries to face, eyes, hands, feet, 

head or ears. Use safety glasses or a 

face shield, high boots or sturdy shoes, 

long trousers, work gloves, a hard hat 

and hearing protection.

•  Do not start the tool when it is upside 

down or when it is not in the operating 
position.

•  Switch the motor off and remove the 

battery when the tool is not being 
used, when it is left unattended, being 
cleanedor, being moved from one place 
to another.

•  Do not operate the tool near people, 

especially children or pets. Turn it off 
if they get too close. Maintain a safe 
distance of at least 16’ (5 m) from other 
people when using the tool.

•  Never direct the blower tube toward 

bystanders or pets. Never blow debris in 
the direction of bystanders or pets.

•  Do not handle the battery or the tool 

with wet hands and do not use the tool 
in the rain.

•  Keep all the air intakes and the blower 

tube free of dust, lint, hair and other 
material that may cause a reduction in 
air flow.

•  Keep a balanced and stable stance 

while using the tool.

•  Do not turn the tool on in enclosed 

or poorly ventilated spaces or in the 
presence of flammable and/or explosive 
substances such as liquids, gases and 
powders.

•  Only operate the tool during broad 

daylight or with adequate artificial light.

•  When the tool is not in use, store it in a 

dry place and out of reach of children.

•  After use, remove the battery pack 

and check for damage. If you have the 
slightest doubts, contact an authorised 
service centre.

•  Only use the tool according to the 

instructions given in this manual.

•  Check for alignment of moving parts, 

binding of moving parts, breakage 
of parts, mounting and any other 
conditions that may affect its operation. 
A tube or other part that is damaged 
should be properly repaired or replaced 
by an authorised service agent.

•  Use only spare parts and accessories 

recommended by the manufacturer.

•  Do not try to repair the tool or access 

internal parts. Contact authorised 
service centres only.

•  Do not get distracted and always 

concentrate on what you are doing. Use 
common sense. Never operate the tool 
when you are tired, sick or under the 
influence of alcohol or drugs.

•  Do not operate this appliance with long 

loose hair or loose-fitting jewellery. Tie 
long, loose hair back and remove loose 
fitting jewellery.

•  Do not use the blower on gravel 

surfaces.

Содержание 060-3891-6

























Отзывы: