model no.
055-0361-0
| contact us: 1.866.523.5218
16
Air Filter
1. Remove the snap-on cover holding the air filter to the assembly.
2. Remove the foam element.
3. Wash in liquid detergent and water. Squeeze thoroughly dry in a clean cloth.
4. Saturate in clean engine oil.
5. Squeeze in a clean, absorbent cloth to remove all excess oil.
6. Place the filter in the assembly.
7. Reattach the air filter cover and snap in place.
Spark Arrester
Allow the engine to cool completely before servicing the spark arrester.
1. Remove the three (3) screws holding the cover plate which retains the end of the spark
arrester to the muffler.
2. Remove the spark arrester screen.
3. Carefully remove the carbon deposits from the spark arrester screen with a wire brush.
4. Replace the spark arrester if it is damaged.
5. Position the spark arrester in the muffler and attach with the three (3) screws.
Failure to clean the spark arrester will result in degraded engine performance.
Cleaning
Use a damp cloth to clean exterior surfaces of the engine.
Use a soft bristle brush to remove dirt and oil.
Use an air compressor (25 PSI) to clear dirt and debris from the engine.
DO NOT spray engine with water. Water can contaminate the fuel system.
Adjustments
The air-fuel mixture is not adjustable. Tampering with the governor can damage your
generator and your electrical devices and will void your warranty.
Saf
ety and Maintenance
