Yardworks 054-5752-2 Скачать руководство пользователя

Страница: 29 / 33

model no. 054-5752-2 | contact us: 1.866.523.5218

Maintenance

QUICK REFERENCE OF CHAIN & BAR ASSEMBLY (SCREW TENSION)

NOTE:

- Chains stretch with use; check and tension often.

- Never tension a warm chain before storing, as chains

shrink when cool, this can damage chain, bar and saw.

1. Release chain tension by turning the

tensioning screw, located behind the

chain bar, counter clockwise.

2. Unscrew the locking knob.

3. Remove the cover.

4. The bar and chain can now be removed

by lifting them away from the main body

of the saw and releasing the chain from

the drive pulley.

5. The pole saw can now be cleaned with

a brush and or rag to remove sawdust

and oil.

6. To replace the bar and chain, loop the

chain over the drive pulley and place

the bar against the centre alignment

groove.

7. Ensure that the adjusting block is

located in the tensioning hole on

the chain bar...

8. ...and that the rubber block and chain

bar are free from oil, as this helps to

keep tension on the chain.

9. Replace the side cover and locking

knob, but do not tighten.

10. Using a screwdriver on the tensioning

screw...turn clockwise.

11. ...until there is enough play so that the

chain can be pulled away from the bar,

but not so much that the runners can

be pulled out of the bar.

12. Once you have the correct tension,

fully tighten the locking knob.

ADJUSTING
BLOCK

LOCKING KNOB

Содержание 054-5752-2


































Результаты поиска

Содержание 054-5752-2

Отзывы:

Похожие инструкции для 054-5752-2

Бренды по названию

Популярные бренды

Yardworks 054-5752-2, Инструкция по эксплуатации

Результаты поиска

Содержание 054-5752-2

Отзывы:

Похожие инструкции для 054-5752-2

Бренды по названию

Популярные бренды